Productgroep
Merk
v
11 Kabeldetectie (1 artikelen)
Prev[1]Next
Toon: Grid Sorteer op:
PMIT807100 MIT Cable Detector MIT Cable Detector It is essential to locate cables and metal pipes to check the ground for the presence of cables and metal pipes before groundworks and digging. The advantages at a glance: Detection and localization of buried cables and metal pipes Inspection of the subsoil to ensure safe excavations Estimation of the depth of located cable Both passive and active localization of cables and pipes Suppression of radio interference Low weight as well and easy handling Attractive price-performance ratio Principle of Operation Long cables and metal pipes act like a receiving antenna that are able to pick up electromagnetic fields (e.g. from long-wave transmitters). This leads to magnetic field noise generation around the cables. The MIT-Cable Detector receives the magnetic noise and converts it into audible signals. To perform a search, the device must be moved over the search area. A sound signal indicates the localization of a cable. Additionally, its depth can be determined by tilting the device. The supplementary transmitter also allows cables to be traced that emit only a weak signal. Cables can be detected up to 2 mtrs. depth depending on the strength of the signal and/or if an additional transmitter will be used. Construction Antenna Reception of electromagnetic noise signals of cables and metal pipes Operating unit Transformation of electromagnetic noises into accoustic signals Headphones Output of acoustic signals for locating cables and metal pipes Additional Transmitter The additional transmitter is used for active localization of cables or metal pipes that emit only a weak signal. It induces a magnetic current within the cable/pipe to then locate or follow. Technical Data MIT-Cable Detector Signal generator Frequency 133 kHz +/- 7,5 kHz Frequency 133 kHz +/- 2 kHz Dimensions 100 x14 x3,5 cm Transmitter dimensions dia 2 x 28 cm Weight 400 g Power supply 9 V battery Power supply 4x AA battery 1.5 V (for about 20 hours) Ports 3.5 mm stereo socket PMIT807100
PMIT807100
v
Prev[1]Next