A - Aggregates - Rocks (398 articles)
Prev[1]234561516Next
Show: Grid Sort by:
A048N-KIT   A048N-KIT Complete set of 14 grid sieves Complete set of 14 grid sieves
 A048N-KIT
A048N-KIT
v
A059-01-KIT   A059-01-KIT Electrom.sieve shaker dia.200mm Electrom.sieve shaker dia.200mm
 A059-01-KIT
A059-01-KIT
v
A059-02-KIT   A059-02-KIT Electrom. sieve shaker dia. 200 to 315mm Electrom. sieve shaker dia. 200 to 315 mm
 A059-02-KIT
A059-02-KIT
v
A059-03-KIT   A059-03-KIT Electrom. sieve shaker dia. 200 to 400mm Electrom. sieve shaker dia. 200 to 400mm
 A059-03-KIT
A059-03-KIT
v
A059-04-KIT   A059-04-KIT Electrom. sieve shaker dia. 200 to 450mm Electrom. sieve shaker dia. 200 to 450mm
 A059-04-KIT
A059-04-KIT
v
AI021   AI021 Moisture meter for sand and aggregates HD2 Moisture meter for sand and aggregates HD2 + SONO-M1 + case

Battery powered mobile display unit (robust aluminium dicast box, IP67(150x64x36mm)
 for TRIME-PICO 32/64/IPH/SONO-M1/M2. , 
incl.rechargeable battery pack 4,8V-DC,2000mAh battery capacity. 
With a full rechargeable battery are up to 1500measurement cycle possible!
- Up to 15 different calibrations are storable in the connected probe!
- RS485 interface

incl. accessories:
- wall power supply 12V/2A/24W to charge the internal rechargeable battery, input
voltage: 100-240VAC 50Hz/60Hz, 2m cable with DC connector
- charging adapter (7pin female connectorto DC connector)
- world wide connector set
- 1 x protection cap
- 1 x carring case-HEAVY 4028, 500x420x125mm
- 1 x user manual HD2

Combined with
mobile moisture sensor for sand/gravel,version P2 with integrated TDR electronics
and temperature sensor (integrated in the probe bottom!) to measure the temperature
and the electrical conductivity when the sensors are fixtures installed in the material.
IP 68 sealed.
Probe-ø: 64mm
Probe Length: 350mm
Rod length: 130mm (blank or PVC coated)
Rod diameter: 6mm
RS485 interface for connection to the HD2 readout device
Measuring range: 0 .. 40% vol. water
content
Conductivity: 0...5dS/m
- HD2 cable 1,5m
- HD2 User manual AI021
AI021
v
AMB021  A021 Moisture meter "Microlance" 1 meter rod Moisture meter microlance
 A021-2016
AMB021
v
A068  A068 Large capacity sample splitter Large capacity sample splitter
openings from 12 mm up to more than 108mm 
Clam shell hopper 30L capacity
 A068.jpg
A068
v
A068-01  A068-01 Spare collecting pan for A068 Spare collecting pan for A068
 A068-01.jpg
A068-01
v
A068-11  A068-11 Wheels kit for A068 Wheels kit wiè brake for A068 splitter
 A068-11
A068-11
v
AMB073-10  A073-10 Calibration sand for Efflux index apparatus, EN 933-6 Calibration sand for Efflux index apparatus A073
EN 933-6
 A073-10.jpg
AMB073-10
v
A073N  A073N Efflux index apparatus, EN 933-6; 2014 Efflux index apparatus, EN 933-6:2016
 A073N
A073N
v
A075N  A075 N Los Angeles machine Los Angeles machine 
It can not be sold in èe CE market wièout protection (see accessories).
 A075N
A075N
v
A076-02  A076-02 Set of 12 charges NF-  EN Set of 12 charges NF P18-573, EN 1097-2
 A076-02.jpg
A076-02
v
A104-01N  A104-01N Ultrasonic cleansing bath cap. 25 LT 350mm Ultrasonic cleansing baè cap. 25 LT
for sieve to 350mm
 A104-01N
A104-01N
v
A104N  A104N Ultrasonic cleansing bath cap.7 L. 250mm Ultrasonic cleansing bath
Used for a safe and valid cleaning of sieves and glassware, which could be damaged by
ordinary cleaning methods. It is particularly suitable for fine mesh sieves. The bath accepts sieves up to 200mm and 8” diameter.
Supplied complete with timer 0 - 99 minutes.
Internal diameter: 260 mm, height 200 mm
Capacity: 7 litres
Stainless steel made, with incorporated electronic generator, frequency 35 KHz.
Supplied complete with lid and discharge cock.
Power supply: 230V 50/60 Hz 1ph 200W
Dimensions: dia. 274 x 370 mm A104N
A104N
v
A113  A113 Skid resistance and friction tester Matest brand Skid resistance and friction tester

ASTM E303, 8204, EN 1097-8, EN 1338, 1339, 1341, 1342, NF P18-578

For the rapid determination of the roughness of a surface, it measures the energy lost when a rubber pad passes. The device is used for measuring the surface fractional and skid resistance properties. The skid tester is suitable for measuring road asphalt and pavements. May be used also for testing polished stone value on aggregates (curved specimens) during accelerated polishing tests, for natural stones (conforming to EN1341, EN1342) and concrete block pavers (conforming to EN 1338). The tests may be performed in both - site and laboratory application.

The pointer, made from light alloy, has extremely low frictions granting high precision results.
The release mechanism of the pendulum arm has an original solution which reduce the friction to minimum for better accuracy.

The skid tester is supplied complete with:
- Additional incorporated scale for tests on Polished Stone Value specimens.
- Rule, plexiglass made, for sliding length verification.
- Thermometer range –10 to +110°C. for surface temperature measurement.
- Stool, wash bottle, bristle, tool set for machine use.
- Carrying case.
- Calibration Certificate conforming to EN 1097-8 and ASTM E303

The tester is supplied WITHOUT rubber sliders that have to be ordered separately.

Case dimensions: 730x730x330 mm
Weight: 32 kg approx.

Accessories:
A110-01 Rubber laboratory slider for A113
A110-03 Rubber site slider
A110-11 Metal base plate
A110-12: Fixing device to base for lab. Polished tests
A110-13: Fixing device to base for blocks and nat. stones

v-2017-05 A113
A113
v
200PSS  Sieve perforated dia 200mm openings Sieve stainless steel, diameter 200 mm, with serial number and certificate
perforated plate with openings  300PSS100.0.jpg
300PSS  Sieve perforated dia 300mm openings Sieve stainless steel, diameter 300 mm, with serial number and certificate
perforated plate with openings  300PSS100.0.jpg
315PSS  Sieve perforated dia 315mm openings Sieve stainless steel, diameter 315 mm, with serial number and certificate
perforated plate with openings  300PSS100.0.jpg
350PSS  Sieve perforated dia 350mm openings Sieve stainless steel, diameter 350 mm, with serial number and certificate
perforated plate with openings  300PSS100.0.jpg
400PSS  Sieve perforated dia 400mm openings Sieve stainless steel, diameter 400 mm, with serial number and certificate
perforated plate with openings  300PSS100.0.jpg
200W  Sieve woven dia 200mm openings Sieve stainless steel, diameter 200 mm, with serial number and certificate
woven wire with openings  200W063.jpg
300W  Sieve woven dia 300mm openings Sieve stainless steel, diameter 300 mm, with serial number and certificate
woven wire with openings  200W063.jpg
315W  Sieve woven dia 315mm openings Sieve stainless steel, diameter 315 mm, with serial number and certificate
woven wire with openings  200W063.jpg
Prev[1]234561516Next