S - Soil / sand (291 articles)
Prev[1]234561112Next
Show: Grid Sort by:
PANDA R   Panda version 2018 Panda device supplied with: beating head, conduction block, communication terminal, converter, depè sensor, charger, standard hammer, 10 rods (50cm), 2 cone holders, 6 cones 2cm °, 10 lost cones 4cm °, pulling head, 2 wrenches, 1 pair of goggles, Geosprinter software, integrated GPS, trunk
 Panda
PANDA R
v
S050-OCW   S050-OCW Lightweight dynamic penetrometer Lightweight dynamic penetrometer
 S050-OCW.jpg
S050-OCW
v
S050SP   S050SP Lightweight dynamic penetrometer OCW (extension) Lightweight dynamic penetrometer OCW (extension)
- 1 replacement point 5cm²
- 1 metal brush
- 1 bottle of oil
- 2x tools for mounting purpose
- 2x transport cases for weights and extension rods
 S050-OCW.jpg
S050SP
v
S050SP1   S050SP1 Extension rod for S050-OCW 1m Extension rod for S050-OCW 1m
 s050sp1
S050SP1
v
S050SP2   S050SP2 Drive point 5 cm² Drive point 5 cm²  60°
 S050-OCW.jpg
S050SP2
v
S050SPX   S050SPX extractiekruk Option for S050-OCW
1x extraction device  S050-OCW.jpg
S050SPX
v
S083-KIT   S083-KIT Soil Sampler dia 100 x 130 mm compl BS1377-9 Soil Sampler dia 100 x 130 mm complete 
BS1377-9
 S083-KIT.jpg
S083-KIT
v
S084-KIT   S084-KIT Surface soil auger dia 73 x 66mm, complete Surface soil auger dia 73 x 66mm, complete
 S084-KIT.jpg
S084-KIT
v
S092-KIT   S092-KIT Hand auger dia 80mm Hand auger dia 80mm
Norm: ASTM D420 - ASTM D1452 - CNR A VI N. 25 - AASHTO T86 - ASTM T202

Hand auger 80mm dia x 1m long
Gewicht: 4Kg
 S094-KIT.jpg
S092-KIT
v
S093-KIT   S093-KIT Hand auger  Ø10cm Hand auger Ø 10cm, long 1m
 S094-KIT.jpg
S093-KIT
v
S094-KIT   S094-KIT Hand auger  Ø 150mm Hand auger  Ø 150mm

Long 1m, weight 6Kg. S094-KIT.jpg
S094-KIT
v
S143-KIT   S143-KIT Particle size sedimentation, pipette method Particle size sedimentation, pipette method
Complete set comprises:
S144: Andreasen pipette, 25ml capacity, for an accurate extraction of the quantities of soil in suspension for analysis.
S144-01: Pipette stand, to accurately raise and lower the Pipette wirh no tranmission of vibration to not disturb the sample suspension. Weight: 10Kg.
S144-02: Sedimentation cylinder, 500ml capacity
S144-03: Rubber bung for cylinder
S144-04 Evaporating dish, glass, dia 90 by 50mm height
V172-03: Soil Hydrometer, long stem, 0.995 to 1030g/ml (BS,NF)
S155-04: Glass tank, dimensions 600x300x380mm
S155-09: Heater, "professional type", complete with thermostat, cooling coil and circulating unit. 230V, 1phase, 50Hz,1000W
Note: each item can be ordered separately:

Accesories:
S144-10: Andreasen Pipette, capacity:10ml
C306-03 Seperate control panel, complete with on/off switch and electric protections, to get S155-09 heater to  CE Safety Directive
A117 End-over-end shaker S143-KIT.jpg
S143-KIT
v
S155-KIT   S155-KIT Particle size sediment. hydrometer method Particle size sediment. hydrometer meèod
 S155-KIT.jpg
S155-KIT
v
S157-KIT   S157-KIT Blue methylene test set Blue methylene test, clay content in fine aggregates
Standards EN 933/9 - NF P94/068
Utilized to determine èe clay content in èe fine portions of èe aggregates.
èe set comprises:
- S157-01 Electric stirrer adjustable from 400 to 700 rpm, complete wiè 70 mm dia. propeller. 230 V 1ph 50 Hz
- S157-06 Support base for stirrer
- S157-02 Burette 50 x 0,1 ml wiè stopcock
- S157-07 Support base for burette
- S157-08 Pan 200x150x80 mm
- S157-03 Filter paper 90 mm dia. (pack of 100)
- S157-04 Glass ..
 S157-KIT.jpg
S157-KIT
v
S158-KIT   S158 KIT Sand equivalent. (complete set) ASTM Sand equivalent. complete set. ASTM
Consists of:
-S158-01: Plexiglass measuring cylinders (5pc)
-S158-02: Rubber stopper for cylinder (2pc)
-V176-02: Graduated rule, 500 mm
-V136-01: Funnel wide mouth
-S158-04: measuring can 88ml capacity
-V121: Plastic bottle, 5 liter
-V170: Digital Chronograph
-S158-09: 1 liter concentrated solution
-S158-10: Irrigator tube with stopcock and syphon assembly EN/ASTM
-S158-11: Clamp set to hold the syphon assembly with bottle
-S158-12: Portable carrying case, dimensions: 550x250x400mm
-S158-07: Weighted foor assembly for sand level 
-200W-4.75: sieve  dia 200mm, opening 4,75 mm

 S158-KIT.jpg
S158-KIT
v
S158-20-KIT   S158-20 KIT Sand equivalent EN (complete set) Sand equivalent. complete set. EN933-8 /NF XP18-598/

Composed by:
-S158-03: Plexiglass measuring cylinder (5pc)
-S158-02: Rubber stopper
-V176-02: Graduated rule 500mm
-V136-01: Funnel, wide mouth
-S158-05: measuring can 200 ml
-V121: Plastic bottle 5L
-S158-10: Irrigator tube with stopcock and syphon EN/ASTM
-S158-13: Weighted foot assembly for sand level
-200W2.00: Sieve dia 200mm, opening 2 mm
-S158-09: concentrated Stock solution 1L
-V170: Stop watch, digital
-S158-11: Clamp stand set to hold the syphon assembly with bottle
-S158-12 Portable carrying case, dimensions:550x250x400mm S158-20-KIT.jpg
S158-20-KIT
v
S159-KIT   S159 KIT Sand equivalent. simple set. ASTM Sand equivalent. simple set. ASTM
 S159-KIT.jpg
S159-KIT
v
S159-01-KIT   S159-01 KIT Sand equivalent. simple set. EN Sand equivalent. simple set. EN
S158-03N: Plexiglass measuring cylinder (4pc) engraved at 100 and 380mm
V176-02: Graduated rule 500mm, stainless steel
S158-02: Rubber stopper cylinders (2pc)
V136-01: Funnel, wide mouth
S158-05: Measuring can 200 ml 
V121: Plastic bottle 5 liter
S158-10: irrigator tube with stopcock and syphon assembly EN/ASTM
S158-13: Weigted foot assembly for sand level
S158-09: 1 liter concentrated stock solution  S159-01-KIT.jpg
S159-01-KIT
v
S165-01-KIT   S165-01 KIT Cone digital penetrometer, complete Cone digital penetrometer, digital, complete
Penetrometer standaard digitaal bestaat uit:
- Aluminium base with leveling screws and spirit level.
- Chromed vertical rod with "micrometric vertical displacement device"
- Digital readout of the penetration values.
- Readings in mm. and in inch. with resolutiont 0,01 mm. Display LCD 5 digits, with zero set in any position.
- Power supply: 1,5 V battery.
- Slider, Brass made, with free fall, stop and release push button, automatic zero set.
- Stainless penetration test cone 35 mm long, 30° angle
- Weight 20 g.
- Two brass cups dia. 55x35 mm and dia.70x45 mm

Dimensions: 220x170x410 mm
Total weight: 13 kg approx.

Spare parts:
S166-01: Penetration cone, 30°  
S166-02: Weight 20g 
V122-05:  Brass cup 55x35mm 

Accessories:
S166-03:test gauge, to check the condition of the cone point 30°angle
S166-04: test Cone 60° and 60g weight ( liquid limit and shear strenght tests)
S166-05: test gauge  to check the condition of the cone point 60°angle
S166-06: weight 320 g to be added to the cone 30° angle, to get a total weight of 400g (shear strenght test)
B057-02: mirror to facilitate the height adjustment of the cone
V122-08: Sample cup, aluminum 55mm dia.x40mm, to meet specs BS1377:2 specifications


V122-06:  Brass cup 70x45mm   
 S165-01-KIT.jpg
S165-01-KIT
v
S165-02-KIT   S165-02 KIT Cone penetrometer, semiautomatic, digital Cone penetrometer, semiautomatic, digital
 S165-02-KIT.jpg
S165-02-KIT
v
S187-01   S187-01 Standard proctor rammer, EN, BS Standard proctor rammer, EN, BS
 S187-01.jpg
S187-01
v
S188-01   S188-01 Modified proctor rammer, NF Modified proctor rammer, EN, BS
 S188-01.jpg
S188-01
v
S194-03   S194-03 Standard proctor mould, split, EN, DIN Standard proctor mould, split, EN, DIN
 S194-03.jpg
S194-03
v
S199-11KIT   S199-11KIT Automatic CBR/Proctor compactor CBR/Proctor Fully Automatic Compactor
with CE Safety Guards, Standard Rammer 50,0 mm dia (weight 2,50 kg) and one rammer weight 4,50 kg
space to forsee 1500 x 1000 x h2500 mm S199-11KIT
S199-11KIT
v
S260   S260 Consolidation apparatus (oedometer) Consolidation apparatus (oedometer)
Rigidly manufactured from aluminium alloy casting to provide a high degree of accuracy with any frame distorsion under load. The load bridge group is supported in high accuracy self-aligning seat balls.
The beam provides three loading ratio: 9:1 10:1 11:1 and the beam assembly is fitted with an adjustable counterbalance weight.
Maximun load: 170 kg of slotted weights, corresponding to 1870 Kg using the beam ratio 11:1
The oedometer accepts cells up to 100 cm2

Supplied complete with rod holding the weights and coupling block holding the dial gauge or transducer.
Supplied “without”: consolidation cell, weights, dial gauge (or transducer), holding bench which have to be ordered separately.
Weight: 25 kg approx.

ACCESSORIES
S376 DIAL GAUGE 10 mm travel x 0,01 mm subd. for vertical displacements.

S375-01 DIAL GAUGE 12 mm travel x 0,002 mm subdiv.

 S260.jpg
S260
v
Prev[1]234561112Next