12 Pull off (23 articles)
Prev[1]Next
Show: Grid Sort by:
E142   E142 Digital pull-off tester 16kN capacity Digital pull-off strength tester 16kN
Specifications:
- Load capacity: 16 kN
- Resolution: 10 N
- Working range: 0,25 to 16 kN
- Accuracy and repeatability: better than +/- 1%
 E142.jpg
E142
v
E142-01   E142-01 Digital pull-off tester 5 kN capacity Digital pull-off tester 5 kN capacity
 E142-01.jpg
E142-01
v
P34610 000  DY-206 Pull-off tester 6kN DY-206 Pull-off tester 6kN,
	
Proceq DY-206 is an automated pull-off tester with a maximum pulling force of 6 kN. It has increased accuracy for low strength applications such as testing adhesive strength of mortars and renders. 

The device can be used for measuring:
-Adhesive strength of mortars and renders
-Adhesive strength of tiles			
-Bond strength of coatings and overlays

Working Range: 0.3 to 3.1 MPa
Tensile force (50 mm test disc): 0.6 to 6 kN
Maximum Stroke: 5 mm
Maximum Pulling Speed: 4.65 mm/min
Calibration Accuracy: EN ISO 7500-1 Class 1 (±1 % from 20 % of maximum force)
Weight: 4.5 kg

According to standards: EN 1542; EN 1015-12; EN 1348; ISO 4624; ASTM D 4541; ASTM C 1583; ASTM D 7234; ASTM D 7522...

consisting of: Pull-off tester DY-206, standard accessories (battery charger wiè USB-cable, test disc Aluminium dia 50mm/M10, draw bolt M10, torque screwdriver, software, operating instructions, calibration certificate and carrying case) Accuracy class to be determined by special software. Software not included P34610 000.jpg
P34610 000
v
P34620 000  DY-216 Pull-off tester 15,5kN DY-216 Pull-off tester 15,5kN,

Proceq DY-216 is an automated pull-off tester with a maximum pulling force of 16 kN (3597 lbf). It is a mid-range instrument suitable for most pull-off testing applications. 

Working Range: 0.81 to 8.1 MPa 
Tensile force (50 mm test disc): 1.6 to 16 kN
Maximum Stroke: 5 mm
Maximum Pulling Speed: 4.65 mm/min
Calibration Accuracy: EN ISO 7500-1 Class 1 (±1 % from 20 % of maximum force)

The device can be used for measuring:
-Adhesive strength of mortars and renders			
-Adhesive strength of asphalt			
-Adhesive strength of tiles			
-Bond strength of coatings and overlays			
-Bond strength of repair materials such as FRP			
-Tensile strength in concrete renovation

Memory:100 measurements
PC Software: DY-2 Link with live view of actual load rate graph

Standards: EN 1542; EN 1015-12; EN 1348; ISO 4624; ASTM D 4541; ASTM C 1583;ASTM D 7234; ASTM D 7522; ZTV-ING; SIA 281/3; JGJ 110; JGJ 126; JGJ 144 

consisting of: 
Pull-off tester DY-216, standard accessories (battery charger wiè USB-cable, test disc Aluminium dia 50mm/M10, draw bolt M10, torque screwdriver, software, operating instructions and carrying case)
Accuracy class to be determined by special software .
Software not included
 P34620 000.jpg
P34620 000
v
P34630 000  DY-225 Pull-off tester 25 kN Proceq DY-225 Pull-off tester 25 kN,

Proceq DY-225 is an automated pull-off tester with a maximum pulling force of 25 kN. It is suited for very high strength applications such as testing of fibre reinforced polymers (FRP) bonded to concrete structures.

DY-225 can measure:
Bond strength of coatings and overlays			
Bond strength of repair materials such as FRP			
Tensile strength in concrete renovation

Working Range: 2.5 to 25 kN
Tensile force (50 mm test disc): 1.3 to 12.7 MPa
Maximum Stroke: 5 mm
Maximum Pulling Speed: 2.2 mm/min

According to standards: EN 1542; EN 1015-12; EN 1348; ISO 4624; ASTM D 4541; ASTM C 1583; ASTM D 7234; ASTM D 7522; ZTV-ING; SIA 281/3; JGJ 110; JGJ 126; JGJ 144

consisting of: 
Pull-off tester DY-225, standard accessories (battery charger wiè USB-cable, test disc Aluminium dia 50mm/M10, draw bolt M10, torque screwdriver, software, operating instructions, calibration certificate and carrying case)
Accuracy class to be determined by special software .
Software not included P34630 000.jpg
P34630 000
v
EE142  E142E Pull-off tester  Defelsko ATA20 Automatic E142E Pull-off tester  Defelsko ATA20

Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet, shoulder strap, Certificate of Calibration traceable to NIST, two-year warranty, and a sturdy, lightweight carrying case^

* Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off).

^ Upgrade to the Pelican® case by adding a '-P' to the Ordering Code.

Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others E142E Defelsko ATA20 Pull-off tester automatic
EE142
v
P34610506S DY-2  Test disc alu dia 100x100 / M10 set of 3 DY-2  Test disc alu dia 100x100 / M10 set of 3 Proceq disc
P34610506S
v
P34610 501S DY-2  Test disc aluminium dia 50 / M10 set of 10 DY-2 Test disc aluminium dia 50 / M10 set of 10
 P34610 501S
P34610 501S
v
P34500 310 Dyna Estrich DYNA ESTRICH consisting of: Pull-off Tester up to 4.5KN, test disc steel Ø 50 mm/M8, Draw bolt M8, calibration certificate, operating instructions, carrying case

Tester for determining the adhesive strength of floor surfaces
Instrument with analogue manometer with tell-tale pointer for measuring the maximum test value.
Simple and safe handling:
• Place tester on the prepared test disc
• Turn back tell-tale pointer to zero
• Turn wheel to the desired test force or until detachement of the test disc
• Read measured value from manomater

Technical data
Display: in N/mm² based on dia. 50 mm test disc
Tensile force max: 4000 N equivalent to 2 N/mm²
Accuracy of measurement: < 3%
Tensile stroke: 20 mm
Carrying case: 320 x 290 x 110 mm
Tester: net weight 1.8 kg
Total weight: 2.8 kg P34500 310.jpg
P34500 310
v
E142-10 E142-10 Software for PC unloading data SW for PC unloading data on a digital pull-off strengè tester 16kN
 E142-10.jpg
E142-10
v
EP142 E142E Pull-off tester  Defelsko ATA20 E142E Pull-off tester  Defelsko ATA20

Upgraded to the Pelican® case
Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet, shoulder strap, Certificate of Calibration traceable to NIST, two-year warranty, and a sturdy, lightweight carrying case^

* Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off).



Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others EP142
EP142
v
EE142-01 E142E Pull-off tester  Defelsko ATA50 E142E Pull-off tester  Defelsko ATA50


Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet, shoulder strap, Certificate of Calibration traceable to NIST, two-year warranty, and a sturdy, lightweight carrying case^

* Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off).

^ Upgrade to the Pelican® case by adding a '-P' to the Ordering Code.

Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others EE142-01
EE142-01
v
E143 E143 Adhesion aluminium disc 20mm dia. (10 pcs) Adhesion metal disc 20mm dia. (10pcs)
 E143.jpg
E143
v
E143-01 E143-01 Adhesion aluminium disc 50mm dia. (10 pcs) Adhesion aluminium disc 50mm dia./ M8 (10 pcs)
 E143-01.jpg
E143-01
v
E143-02 E143-02 Tungsten carbide bit dia 20mm Tungsten carbide bit dia 20mm
 E143-02.jpg
E143-02
v
E143-03 E143-03 Tungsten carbide bit dia 50mm Tungsten carbide bit dia 50mm
 E143-03.jpg
E143-03
v
E143-03D E143-03D diamant bit internal dia 50mm E143-03D diamant bit internal dia 50mm
M14 aansluiting ( haakse slijper) E143-03D
E143-03D
v
E143-09 E143-09 Spare tie rod with spheric head Spare Tie Rod with Spheric Head
 E143-09.jpg
E143-09
v
E143-10 E143-10 Adhes.st.steel disc 50mm dia. (10pcs), EN 1015-12 Adhesion metal SS disc 50mm dia. (10pcs)
 E143-10.jpg
E143-10
v
E143-11 E143-11 Cylindrical ring dia 50mm Cylindrical Ring dia. 50 mm
 E143-11.jpg
E143-11
v
E143-12 E143-12 Glue Nova Power Grip- 2 components Adhesive glue 2 components without reserve tips
 E143-12.jpg
E143-12
v
E143-13 E143-13 Adhesion aluminium disc 50x50mm  (10 pcs) EN Adhesion metal disc 50x50mm (10 pcs)
EN 1348
 E143-13.jpg
E143-13
v
P345 00 780S P345 00 780S ADHESION METAL DISC 50 MM DIA. ADHESION METAL DISC 50 MM DIA. (10 PIECES)
Proceq Dyna / Estrich /E Y 2
 Proceq disc
P345 00 780S
v
Prev[1]Next