F- Plate Bearing Tests (61 articles)
Prev[1]23Next
Show: Grid Sort by:
SA224-KIT   plate bearing equipment AX01a according to DIN 18134 and SB250, Digital plate bearing AX01a according to DIN 18134 and SB250, German-manufactured AX® 01a, belgian version (Ø300/Ø159,6mm load plates)

The electronic plate bearing tester AX®01 allows to determine the bearing capacity and the deformability of soils. By applying and releasing the load on the soil the device allows to calculate modulus M1 or M2. and the strain moduli Ev1 and Ev2. The instrument equipped with an inclinometer mounted on the pressure plate (replacing two displacement sensors) makes this device also conform to Belgian standards.

With its waterproofed case, outside lying buttons and an illuminated display the electronic device can also be used in demanding environment. Test certificates can already be printed at the building site. The results of the inspection can be saved on an SD-card for further treatment on the PC.

Electronic Static Plate Bearing Test Device according to SB250 / TB2000, DIN18134:2012, WTV EStB 09, NF P 94-117-1 ver. 2000, CSDC-CT, CNR BU 146 1992-12, ÖNORM B4417:1979-12, nach SN 670 317b:1998, TSC 06.720:2003

The Plate Bearing Test with the Plate Load Tester AX®01
Diameter of bearing plate: 159.6 mm; 300 mm, 600 mm, 762 mm adjustable
Lever ratio 1:1
Resolution: settlement/displacement 0,01 mm, standard load 0,0001 MN/m²(printed and saved), 0,001 MN/m² (displayed)
Rechargeable battery; approx. 48 h non-stop usage
Thermal printer, paper width 58 mm
SD-card, storage of about 200 test
Compressive force 100 kN, measurement with only one displacement transducer
Manual hydraulic pump with pressure jack for 100 kN compressive force
High-pressure hose with a length of 2m
Bearing plate ø 159.6,  300 mm with rectangular opening, mounting plate for force sensor and adjustable circular level
Supporting frame with telescopic measuring arm and round bases for direct measuring
Pluggable extension kit (total length 650 mm)
Upper magnetic clamp with ball joint (rated for up to 50 kN)
Displacement sensor mounting: 250 mm and 500 mm long

The SA 224-KIT consists of the electronic registration, built-in printer, SD card, rain protection, loader for 230 V/12 V/24 V, external USB card reader and software Windows for Excel, tripod (length 1150 mm folded, expanded 2330 mm), hydraulic hand pump, pressure plate slide 159.6 mm and slide 300 mm, inclinometer, level control, two sets vertical extensions, upper ball joint with a magnet, force sensor 100 kN, suitcases with wheels SA224-OCW
SA224-KIT
v
S222-KIT   S222-KIT Plate bearing, 100kN, 3 dial gauges model Standard: CNR N. 146 MEèOD A 
Not conform OCW 
Plate bearing. 100kN. 3 dial gauges model
 S222-KIT
S222-KIT
v
ZFG-3.0-GPS-KIT-WIFI   ZFG-3.0KIT10GPS Light weight deflectometer ZFG-3.0 KIT 10 kg ZFG-3.0KIT10 Light weight deflectometer ZFG-3.0 KIT 10+GPS

Composite case with light weight deflectometer ZFG-3.0 GPS set of 10 kg (dynamic plate test)
The carry case has one set.

Trial takes 2 minutes, no counterbalance required
Immediately indicates deformation modulus relative to density
Including drop weight 10 kg (Evd 5 - 80 MN / m²) ,
loading plate 300 mm, electronic measurement reading with data storage, SD card and PC connection
Including printer, software, WiFi-connection,  measuring case, magnetic protection plate and transport case
Handy device with direct result

Accessories:
ZFG-3.0PAP: ZFG Printer Paper Roller (5pcs)



video: https://www.zorn-instruments.de/fileadmin/redaktion/zorn-instruments.de/Produkte/fallgewichtsgeraete/ZFG_3.0/zfg_30_full.mp4  koffer
ZFG-3.0-GPS-KIT-WIFI
v
ZFG-3.1-10/15-COMPL   ZFG-3.1 GPSKIT1015 Light weight deflectometer+ printer+ case + MS ZFG-3.1 GPS KIT 10 15 Light weight deflectometer 
Composed out of
- ZFG-3.1 GPS 10 kg
- ZFG weight 15 kg
- Software
- Printer in Case
- Magnetic Stand
- Transport Case for all on wheels

 ZFG-3.1
ZFG-3.1-10/15-COMPL
v
ZFG-3.1   ZFG-3.1 Light weight deflectometer ZFG-3.0 70MN/m° Light dropping weight measurement device ZFG-3.1 

Test takes 2 minutes, no counterweight needed
Immediately indicates dynamic Emodulus with relation to compactness of the soil

Including dropping weight 10 kg, (Evd 5 -70 MN/m²) plate 300 mm, electronic measuring system with data storage, SD card and PC connection
Safe basis device with direct result (without suitcase, without printer)

Light Weight Deflectometer ZFG 3.1 with 10 kg, 300 mm, ergonomic triangular carrying handle
according to TB BF-StB Part B 8.3/8.4 & ASTM E-2835
> Integrated Wi-Fi module for wireless LWD data transfer to smartphone, tablet
> Load device with 10 kg drop weight, impact load 7.07 kN, measuring range Evd 15 - 70 MPa (MN/m²)
> 300 mm base plate with acceleration sensor (MEMS), max. ground pressure 0.1 MPa (MN/m²)
> Maximum measuring depth / depth of influence: ca. 600 mm
> Sensor housing ready for dynamic CBR and 150 mm base plate accessory
> Ready for optional load device with 15 kg drop weight and 1.5 times impact load (10.605 kN);Measuring range Evd 70-105 MPa (MN/m²)
> Ergonomic, triangular catch handle with slip-resistant surface coating
> All metal parts with corrosion protection and for use at construction sites
> Handheld electronics box (data logger) in robust, weatherproof full leather case
> Automated calculation of deflection mean (s), (s/v) ratio and deformation modulus (Evd),
> Multilingual, backlit and graphics-capable display, display of deflection graphs
> Internal memory and SD-card for up to 10,000 measurements, automatic storage
> SD card USB adapter
> Sensor self-test (2G) and integrated calibration reminder
> Power supply: four standard R6 batteries (Mignon type / AA) for ca. 1,500 tests (included)
> Thermo printer interface
> Calibration protocol & detailed user manual ZFG-3.1
ZFG-3.1
v
SA226-GPS  GPS-option for Plate Bearing Tester AX 01a GPS-option for Plate Bearing Tester AX 01a

- built-in GPS-feature forAX01a
- GPS coordinates can be printed out on site with the in-houseprinter
of the electonic AX 01a and stored at SD-card
- maps of the test position are displayed at the Excel-Sheet from
different internet map servers SA224-OCW
SA226-GPS
v
S223/OCW/VAR  Lebecq Plate bearing equipment BRRC Plate bearing equipment BRRC S223/OCW/VAR
S223/OCW/VAR
v
S223-01E  S223-01E Electronic measurement of the force Electronic PRESSURE GAUGE 0 - 50 KN
 S223-01E
S223-01E
v
SA224-200  SA224 200 kN AX 01a, Electronic Static Plate Bearing Test Device according to
DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM
B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250
4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-3 : 1989,
ready for ASTM and BS standards (by firmware update)
Customs tariff number: 90248019.
The range of delivery allows an immediate measuring with the
calibrated Plate Bearing Tester:
electronic device AX01a for measurement and evaluation of
plate load test
- with built in miniprinter
- with SD/MMC card slot
- with rechargeable battery (fast charger)
- rainproof design, simple user interface
force sensor 100kN, K450 with electronic amplifier and 3 pin
connector
displacement sensor (15mm stroke) with integrated electronic
amplifier
support device with exttractable arm and adjustable
hemispherical feet, bracket for displacement sensor length
250mm and 500mm
load plate, steel S355J0, Ø300mm, with adjustable bubble level
hydraulic hand pump with cylinder (700bar, 100kN) and 2m hose
2 sets extensions (150mm, 100mm, 50mm, 25mm), upper ball
joint with magnet for 50 kN (5 t)
The delivery includes also the following items:
power supply 110-230V (charger), 12V/24V car charging cable
(cigarette lighter), external USB-SD-card reader for PC,
SD/MMC-card for storage, Software for Windows-PC's with
Microsoft Excel®, rainproof brief instruction, manual, 3 rolls of
thermal printing paper
set transport boxes, material plastics/alu, with trolley wheels
- 1 transport box, dimensions 120 x 50 x 40 cm³ (LxWxH)
49 kg GW, for support device, pump and cylinder
- 1 transport box, dimensions 50 x 60 x 40 cm³ (LxWx H)
38 kg GW, for electronic device and load plate 300mm300mm SA224-200kN
SA224-200
v
SA224  SA224 Electronic Static Plate Bearing Test Device according to AX 01a, Electronic Static Plate Bearing Test Device according to
DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM
B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250
4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-3 : 1989,
ready for ASTM and BS standards (by firmware update)

The range of delivery allows an immediate measuring with the calibrated Plate Bearing Tester:
electronic device AX01a for measurement and evaluation of plate load test
- with built in miniprinter
- with SD/MMC card slot
- with rechargeable battery (fast charger)
- rainproof design, simple user interface
force sensor 100kN, K450 with electronic amplifier and 3 pin connector
displacement sensor (15mm stroke) with integrated electronic amplifier
support device with exttractable arm and adjustablehemispherical feet, bracket for displacement sensor length 250mm and 500mm
load plate, steel S355J0, Ø300mm, with adjustable bubble level
hydraulic hand pump with cylinder (700bar, 100kN) and 2m hose
2 sets extensions (150mm, 100mm, 50mm, 25mm), upper ball joint with magnet for 50 kN (5 t)

The delivery includes also the following items:
power supply 110-230V (charger), 12V/24V car charging cable (cigarette lighter), external USB-SD-card reader for PC, SD/MMC-card for storage, Software for Windows-PC's with Microsoft Excel®, rainproof brief instruction, manual, 3 rolls of thermal printing paper, set transport boxes, material plastics/alu, with trolley wheels
- 1 transport box, dimensions 120 x 50 x 40 cm³ (LxWxH)
49 kg GW, for support device, pump and cylinder
- 1 transport box, dimensions 50 x 60 x 40 cm³ (LxWx H)
38 kg GW, for electronic device and load plate 300mm300mm SA224.jpg
SA224
v
SA226-BLP  SA226-BLP Loading plate dia 159.6mm LOADING PLATE DIA 159.6 MM Anix
for Belgian Plate Load Test SA226-BLP
SA226-BLP
v
SM226-05  SM226-05 LOADING PLATE 750 cm² LOADING PLATE 750 cm²
25 mm thick
 SM226-05
SM226-05
v
SM226-06  SM226-06 Loading plate 200 cm² LOADING PLATE 200 cm²
25 mm thick
 SM226-06
SM226-06
v
ZFG-3000-GPS KIT1015 WIFI  ZFG-3000-GPS KIT1015 Light weight deflectometer 10+15kg Light weight deflectometer ZFG-3000-GPS KIT 10+15kg
 ZFG-3000-GPS KIT1015.jpg
ZFG-3000-GPS KIT1015 WIFI
v
SA226-EXT2SET 2 sets extension (150, 100, 50, 25 mm) for ANIX 2 sets extension (150, 100, 50, 25 mm) for ANIX
withoug case SA226-EXT2SET
SA226-EXT2SET
v
SA225-ARFS Adaptor for removable force sensor Anix Adaptor for removable force sensor Anix SA225-ARFS
SA225-ARFS
v
SA224-143CM Ceramic Magnet part of Ball Joint SA224-143 Ceramic Magnet part of Ball Joint SA224-143 SA224-143CM
SA224-143CM
v
SA226-171 Cilincer100 kN for Anix with coupling Cilinder100 kN for Anix with coupling

- adapter for extensions or ball joint
- 1.8m hose and speed coupling
Load plate, force sensor, cylinder and ball joint - without extensions - built a construction hight of 60 cm (measured between bottom side of plate up to counter weight). SA226-171
SA226-171
v
S222-03 DATUM BAR ASSEMBLY, ALUMINIUM 2,5 M Long DATUM BAR ASSEMBLY, ALUMINIUM 2,5 M Long
 S222-03
S222-03
v
S226-12 DEVICE FOR CENTRE DIAL GAUGE DEVICE FOR CENTRE DIAL GAUGE
 S226-12
S226-12
v
S222-02D Digital pressure system 0-100 kN  10N res Digital pressure system 0-100 kN  10N res
without pump

Digital pressure manometer 0-100 kN.

The applied load is measured by a high precision electric load cell with digital display, granting accurate readings also at low loads.
- 65.000 divisions
- 10N resolution
- linearity: 0.05%
- hysteresis: 0.03%
- repeatability: 0.02%
- display: LCD with high visibility
- display height: 16 mm
- battery operated, 12 months life S222-02D
S222-02D
v
S225-02D Digital pressure system 0-200 kN  10N res Digital pressure system 0-200 kN  10N res
without pump

Digital pressure manometer 0-200 kN.

The applied load is measured by a high precision electric load cell with digital display, granting accurate readings also at low loads.
- 65.000 divisions
- 10N resolution
- linearity: 0.05%
- hysteresis: 0.03%
- repeatability: 0.02%
- display: LCD with high visibility
- display height: 16 mm
- battery operated, 12 months life S225-02D
S225-02D
v
SA224-LVD Displacement sensor Anix Displacement sensor 15 mm Anix with amplifier SA224-LVD
SA224-LVD
v
SA226-EXT 10CM extension aluminium dia50, 100 mm for ANIX Extension aluminium Ø50, 100mm, for plate load test
 SA226-EXT 10CM
SA226-EXT 10CM
v
SA226-EXT 15CM extension aluminium dia50, 150 mm for ANIX Extension aluminium Ø50, 150mm, for plate load test
 SA226-EXT 15CM
SA226-EXT 15CM
v
Prev[1]23Next