P - Diagnosis (146 articles)
Prev[1]23456Next
Show: Grid Sort by:
P340 20 000    Original Schmidt Live L Original Schmidt Live L P340 10 000
P340 20 000
v
P340 10 000    Original Schmidt Live N Original Schmidt Live N P340 10 000
P340 10 000
v
P32620001    P32620001 Pundit Lab + P32620001 Pundit LAb+

The Pundit Lab is a flexible UPV test instrument designed primarily for operation in laboratories. It supports all traditional UPV test modes. The Pundit Lab+ comes with an extended feature set like: compressive strength correlation, compressive strength estimation, integrated amplifier gain stage; SONBER conversion curves; real time stamp

According with standards: EN 12504-4; ASTM C 597-02; ISO 1920-7:2004; IS 13311; CECS 21
 
Automated combination of the transmitter voltage and the receiver gain for accurate and stable measurements. Pundit Lab+ removes the need for external amplification when used with exponential transducers

Common Features Pundit Lab+:
Nominal transducer frequency: 24 – 500 kHz
Transit time range: 0.1-9999 µs
Resolution: 0.1 µs
Energising pulse: 125 V, 250 V, 350 V, 500 V, AUTO
Tx frequency range: 24-500 kHz
Transit time: Yes
Pulse velocity: Yes
Path length:Yes
Surface velocity: Yes
Crack depth: Yes
Memory: > 500 readings
Power supply: Mains/Battery(>20h)/USB
New Features: Pundit Lab+
Integrated gain stage: 1x, 2x, 5x, 10x, 20x, 50x, 100x, 200x, 500x, 1000x
Compressive strength: Yes
SONREB method (Ultrasonic plus rebound hammer for compressive strength): Yes
Time stamp for measurements: Yes
Measurement review list on instrument: Yes

Consisting of: Display unit, 2 transducers (54 kHz), 2 BNC cables 1.5 m, couplant, calibration rod, USB charger with USB-cable, 4x AA batteries, data carrier with software, documentation and carrying case P32620001.jpg
P32620001
v
C318N   C318N Electric core drilling machine, lightweight Electric core drilling machine. Lightweight
 C318N.jpg
C318N
v
C319   C319 Petrol core drilling machine. 5 HP Petrol core drilling machine. 5 HP
 c319
C319
v
C319-02   C319-02 PETROL CORE DRILLING MACHINE. 12 HP PETROL CORE DRILLING MACHINE. 12 HP
 c319-02
C319-02
v
C324N   C324N Electric core drilling machine, vacuum fac. The frame and the electric motor are the same of mod. C318N.
The machine is supplied complete with lubricated vacuum pump and pressure accumulation reservoir, which is very useful because it maintains for some times a valid vacuum level also with electric blackout, by avoiding the fall or disconnection of the unit from the wall.
The pump is connected to the utility by means of a ball tap to which a vacuum gage is fitted, that constantly indicates the pressure inside the tank.
Coring angle: 0 to 360° under the condition that the surface is sufficiently flat, and not too porous, to allow the vacuum attachment.

Power supply: 230V 1ph 50/60Hz 2200W
Dimensions: 600x320x1020 mm + pump
Weight: 24 kg + pump 15 kg C324N.jpg
C324N
v
C375-02N   C375-02N Carbonation test set, EN 13295, EN 14630 Carbonation test set, EN 13295, EN 14630
 C375-02N
C375-02N
v
C380   C380 Concrete Matest test hammer MPA diagram Concrete test hammer classic model

Spring impact energy 0,225 mkg.(2,207 Joule) 

The device dedicated to measure the finished concrete structures and buildings having strength resistances from 10 to 70 N/sq.mm. This concrete test hammer, entirely produced by Matest, has aluminium frame, and thanks to its very accurate manufacture processing and selected components ensures high precision test results in the time. Conversion tables allows to deduce the compressive strength from the rebound value.

This non destructive testing method is safe for the structure of the concrete and allows to examine its hardness accurately. It is the top quality test hammer available on the market.

Supplied complete with calibration curve chart in N/mm 2 (Mpa) values, abrasive stone, carrying case.

Dimensions: 330X100X100 mm
Weight: 2 Kg C380.jpg
C380
v
C380-01   C380-01 Concrete Matest test hammer PSI diagram Concrete test hammer ASTM Model

Exactly the same to model C380 - Matest's concrete hardness tester sold and calibrated by Macben - but the calibration curve chart shows the resultats in PsI values as requested by ASTM C805 Specifications.

Please, check "C380" on our webshop. C380-01.jpg
C380-01
v
C381   C381 Rock test hammer, Matest low energy Test hammer impact energy 0,735 Joule

Low impact energy model

The hammer tester dedicated for rock classification test. The device allows to make a test with a lower impact energy especially dedicated to small elements, fragile and impact-sensitive materials and thin wall construcions. 

The core rock specimen normally NX 54.7 mm diameter is held on a special cradle (accessory - A121 - check it on our webshop) in horizontal position, and the hammer tests the sample in all its length, to obtain an average of the readings.

Impact energy: 0.74 Nm
Measuring range: 10...60 N/mm2
Weight: 2 kg C381.jpg
C381
v
P34131 000   C384/P-PC Silver Schmidt test hammer PC Type N Silver Schmidt test hammer PC Type N

The SilverSchmidt is a unique integrated concrete test hammer featuring true rebound value calculated from the quotient of the impact velocity and rebound velocity to provide maximum accuracy. 

Automatic calcuation of rebound value according to international standards
Best in class correlation with least dispersion for specific concrete mixes
Extremely durable with long service intervals when compared with classical hammer

PC Extended memory usage. Custom curves. Download to PC. Full Hammerlink Software functionality.
N-Type standard impact energy. The test object should have a min. thickness of 100 mm and be firmly fixed in the structure

Impact Energy 2.207 Nm	
Compression resistance range: 10 to 100 N/mm2
PC Memory: 400 series of 10 measurements 

PC Software:
Full Hammerlink software functionality. Extended memory usage. Download to PC. User defined custom curves. 
Hammerlink for rapid uniformity testing with the summary view, user defined conversion curves (polynomial and exponential), user defined statistical methods and export to third party software

The device offers:
Predefined curves
Custom curves
Form factor correction
Impact angle correction
Carbonation correction
User defined and Standardized statistics
Single button programming of settings

According with standards: 
EN 12504-2; EN 13791; ASTM C 805

SilverSchmidt Concrete Test Hammer, standard accessories (battery charger with USB cable, data carrier with software, carrying strap, grinding stone, chalk, documentation) and carrying bag Silver Schmidt
P34131 000
v
C386N   C386N Digital concrete Matest test hammer Concrete Digital Test hammer Matest

This digital concrete test hammer manufactured by Matest
performs basic concrete testing with continuous automatic recording of all parameters in accordance with EN 12504-2 specifications.

Standards: EN 12504-2, DIN 1048, ASTM C805, Uni 9189, BS 1881:202, NF P18-417

The device determined to measure hardness of the concrete.The device consists of the standard mechanical model C380, but equipped with an electronic transducer that measures the rebound values and supplies automatically the results on a graphic display. The results of the test are registered and available to transfer them to a PC for further analysis. The device allows to automatic conversion of rebound index to equivalent compression strength in psi, N/mm2, kg/cm2

Measuring test performing:
- Shows index value
- Shows average index value
- Allows to select measuring system in MpA or Psi
- Shows numbers of performed rebounds
- Shows date and time
- Identifies tested element
- Identifies automatically and shows rebound angle
- Shows battery life

Technical specifications: 
- Impact energy: 2,207 Joule (Nm)
- Measuring range: 10 – 120 N/mm2
- Interface: RS232
- Power source: 6 rechargeable batteries AA NiMh 2000mA
- Battery life: 60 hours with automatic shutdown
- Operating temperature: -10°C +60°C
- LCD 64 x 124
- Up to 20000 test results

Supplied complete with data transfer software, data transfer cable RS232, battery charger, abrasive stone, carrying case

Dimensions with case: 330x180x120 mm
Weight: 3 kg
 C386N.jpg
C386N
v
P340 20 001   Original Schmidt Live Print L Original Schmidt Live Print L P340 10 000
P340 20 001
v
P340 10 001   Original Schmidt Live Print N Original Schmidt Live Print N P340 10 000
P340 10 001
v
P32610001   P32610001 Pundit Lab P32610001 Pundit LAb

The Pundit Lab is a flexible UPV test instrument designed primarily for operation in laboratories. It supports all traditional UPV test modes. 

Measurement performance; Optimized pulse shaping, automated transmission settings for optimum performance and
a range of new, more powerful transducers ensure accurate, stable measurements.
Integrated waveform display; Allows analysis of the received signal and manual triggering directly on the instrument.
On-line data acquisition; Full remote control of all transmission parameters, data logging function and functionality that turns your PC into an oscilloscope.
USB interface and data analysis software; Data analysis and export to third party programs.
Open interface; Control Pundit Lab using third party software such as LabVIEW. 

Transit time range: 0.1-9999 µs
Resolution: 0.1 µs 
Energising pulse: 125 V, 250 V, 350 V, 500 V, AUTO
Tx frequency range: 24-500 kHz
Transit time: Yes
Pulse velocity: Yes
Path length: Yes 
Surface velocity: Yes
Crack depth: Yes 
Memory: > 500 readings
Power supply: Mains/Battery(>20h)/USB 
New Features :
Integrated gain stage: 1x, 10x, 100x

Standards: EN 12504-4; ASTM C 597-02; ISO 1920-7:2004; IS 13311; CECS 21 P32610001.jpg
P32610001
v
P327 10 001   P32710001 Pundit PL-200 Ultrasonic Testing Equipment Pundit PL-200

Device is used to assess structural integrity and localize defects in concrete and rock.

The Pundit 200 is a best-in-class UPV (ultrasonic pulse velocity) test instrument with an extended range of measurement modes. Rugged touchscreen with intuitive user interface for best possible measuring and analysis of the measured data. 
 
Various measurement modes including Line Scan, Area Scan, Data Logging, compressive strength correlations and E-modulus measurement. Automatic surface velocity calculation according to standards (EN 12504-4; ASTM C 597-02; ISO 1920-7:2004). It uses ultrasonic pulse velocity technology. The same instrument can be used with pulse echo transducers.

Measuring Range: Up to 15 m depending on concrete quality
Bandwidth: 20 to 500 kHz
Measuring Resolution: 0.1 us
Nominal transducer frequency: 24 – 500 kHz

Standards: EN 12504-4, ASTM C 597-02, ISO 1920-7:2004, IS 13311, CECS 21

Includs: Case with band, Documentation, Unit Pundit PL-200, Two transducers (54kHz), Two cables (1,5 m), Software, Accessories P32710001
P327 10 001
v
P381 10 000   P381 10 000 Resipod 50 mm probe space Resipod 50 mm probe space

A complete solution for measuring the electrical resistivity of concrete both in the laboratory under controlled conditions and on site. Standard fixed spacing surface Wenner probe with variable spacing and bulk resistivity accessories. 

Resipods offer
Highest resolution available for a surface resistivity instrument
Current flow indication and poor contact indication
Hold, save and delete function P381 10 000.jpg
P381 10 000
v
P381 20 000   P381 20 000 Resipod 38mm probe space Resipod 38mm probe space

The Resipod is a fully integrated 4-point Wenner probe designed to measure the electrical resistivity of concrete. It is the most precise device on the market, extremely fast and stable, packaged in a robust and waterproof housing for its use in demanding environment.

Surface resistivity measurements provide extremely useful information on the condition of the concrete structure. The device allows to measure corrosion rate estimation, concrete resistance to aggressive agents, concrete homogeneity, curing conditions or checking fiber distribution in a steelfiber reinforced concrete. The recent studies have shown that there is a direct correlation between resistivity and chloride diffusion rate.It is thus one of the most versatile non-destructive test methods for concrete on the market.

Fully integrated surface resistivity instrument:
- Wide measuring range (0 to ca. 1000 k?cm)
- Fast and accurate delivery of measuring results
- Highest resolution available for a surface resistivity instrument
- Current flow indication and poor contact indication
- USB connection and dedicated PC software
- Allows variable probe spacing to be set

Standards: AASHTO T358-15

Resipod, 38 mm (1.5 ") probe spacing, test strip, foam contact pads, charger with USB cable,  carrying strap, documentation and carrying case

v-2017-05 P381 10 000.jpg
P381 20 000
v
P381 40 000   P381 40 000 RESIPOD 38 mm probe space Bulk resistivity Resipod 38 mm including standard accessories plus bulk resistivity accessory


The Bulk Resistivity test is an alternative method where the sample resistivity is measured between electrical plates placed at either end of the sample. The geometry factor is very simple and the test is rapid to perform, with similar advantages as the surface resistivity test. P38140000
P381 40 000
v
P381 50 000   P381 50 000 RESIPOD Geometric 50mm probe RESIPOD Geometric 50mm probe
including standard accessories plus geometric

Resipod Geometric is supplied with a variable spacing probe that can accommodate larger aggregate sizes. It also allows the user to enter geometric correction factors via the ResipodLink software to give the correct resistivity
reading directly on the instrument. P38150000
P381 50 000
v
P381 60 000   P381 60 000 RESIPOD Geometric 38 mm probe RESIPOD Geometric 38 mm probe
including standard accessories plus geometric

Resipod Geometric is supplied with a variable spacing probe that can accommodate larger aggregate sizes. It also allows the user to enter geometric correction factors via the ResipodLink software to give the correct resistivity reading directly on the instrument. P38160000
P381 60 000
v
P381 30 000   P38130000 Resipod 50 mm probe  complete RESIPOD Bulk Resistivity 50mm probe

The Bulk Resistivity test is an alternative method where the sample resistivity is measured between electrical plates placed at either end of the sample. The geometry factor is very simple and the test is rapid to perform, with similar advantages as the surface resistivity test. 
 P38130000
P381 30 000
v
P391 10 000   P391 10 000 Profoscope Profoscope

Handy cover meter with integrated display and assisted detection feature.

The device is used for:
Locate rebars before drilling, cutting and coring				
Spot check of cover and rebar size

Measuring Range
See graph on previous page for maximum range relative to bar diameter.
Power Supply
Power source 2 x 1.5 V AA (LR6) batteries
Voltage range 3.6 V to 1.8 V
Temperature range -10º to 60º C (14º to 140º F)
Humidity range 0 to 100% rH
Standards: BS1881 part 204; DIN1045; SN 505 262; DGZfP B2

Consists of a Profoscope tester, test kit to boot, carrying case, shoulder straps, chalk, 2 batteries, documentation
 P391 10 000.jpg
P391 10 000
v
P391 20 000   P391 20 000  Profoscope + Profoscope +

Profoscope + has the software ProfoLink pour charger, modifier et présenter les données.

Handy cover meter with integrated display and assisted detection feature. Profoscope+ includes all Profoscope features plus internal memory available for storing measured covers and diameters. 

Profoscope+ mode de mesure:
Localisation des armatures, estimation de diamètre et mesure d’enrobage
Acquisition des données (Profoscope+ uniquement)

Profoscope+ UNIT consisting of: Profoscope+ incl. start-up test kit and accessories, batteries, memory card, usb-cable, canvas bag, carrying strap, chalk, documentation, Profolink-Software P391 20 000.jpg
P391 20 000
v
Prev[1]23456Next